INSTALLATION AND SETUP
Select a preferred configuration for the device before installing the product and setting it up for use.
CAUTION: Follow the installation instructions properly to avoid dropping and damaging the display.
CONFIGURATIONS
UNPACKING THE BOX
OUT OF THE BOX FAILURE
If you experience an out of box failure (OBF) during installation in relation to missing, incorrect, or defective unit or item, send an email to support@glorystargroup.com and provide a description of the issue. Glory Star will first troubleshoot the problem over phone or video to help resolve the issue. If Glory Star determines that a product or component has to be returned to the factory, it will instruct the customer how to remove the components from the product.
MOUNTING THE DISPLAY TO THE WALL
You can purchase a wall mount to mount the display on a wall.
​To mount the display on the wall, follow these steps:
1. Lay the display face down on a flat surface.
CAUTION: Always use a soft material, cloth or foam, to protect the display when placing the screen face down.
2. Mount the monitor bracket at the back of the display. Secure the bracket with bolts and washers.
​3. Place the wall plate on the wall and mark the six mounting holes.
4. Align the wall plate with the mounting holes. Secure the plate to the wall with lag bolts and log bolt washers.
5. Align the display with the wall plate, and then carefully slide down the display until the bracket is safely secured to the wall plate.
6. Plug the AC power adaptor into a power source to turn on the display.